10 Strategies To Build Your Saab 93 Key Replacement Empire

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have a distinct set of steps to take to add an additional key. This requires the use of a handheld computer called Tech-2 that is operated by the dealer. Then it is necessary to purchase a new transponder. key are required to be purchased.

It is an excellent idea to rotate your keys so that one doesn't wear out faster than the other. This will also ensure that your keys remain in pristine condition.

Replacement Case

The new key fobs do not look like the older Saab keys. They feature electronic components that make them difficult to copy. That has made car theft significantly more difficult than it was just a few years ago. It has also made it more expensive to replace keys lost.

Every owner of a Saab 9-3 must have at least two working keys. It's expensive to replace a lost or damaged key since it requires replacing the CIM module, and reprogramming the locking cylinders. Dealers usually charge between $100 and $200 to complete this.

There are several ways to get around these costly. Some parts dealers will use the code of an old key to cut a new metal blade for a fraction of the cost of the dealer. The key must, however, be identical to the original one to function properly in your vehicle.

You can also change the case yourself by following these steps. You'll need an flathead screwdriver and patience. With the screwdriver, slowly tear the plastic away and separate the emergency key from the case. Once the case is open take the electronics out and place them into the new case. Be sure to put the correct key and badge back into the case as well.

Replacement Battery

The replacement battery for the Saab 9-3 is a low-cost part that can be replaced easily and quickly. This DIY video from YouTube Cyclone Cyd shows how to replace the remote key fob battery in just four steps. This tutorial will work with any modern Saab key fob. However, the procedure might differ slightly.

This button is usually located close to the Saab logo on the back of the fob. This button is usually located on the back of the fob, just below the Saab Logo. Then take a flathead screwdriver into the tiny hole in this button. This should be enough to open the case of the fob so that you can replace the battery.

Once the new CR1632 battery is installed it is possible to reassemble the remote key fob and then program it to your car. The whole process should not take more than one hour. It's a very easy procedure that doesn't require any special tools.





If you lose a key, the process is somewhat more complex however, it can be done. The dealer must first read the VIN of the vehicle before requesting an alternative TWICE module, as well as a key blade with the proper unique code. The dealer will then need to program the key using MDI, a brand new software tool.

Replacement Key Fob

The key fob comes with an internal battery that is used to lock and unlock your car. The batteries are able to last for, and they will eventually expire. It is a common problem in all vehicles. The good news is you can replace the battery on most key fobs without having to replace the entire case. You can buy replacement fobs on Amazon that come with all the electronics already installed, which means you can just pop open the case and replace the batteries that were in the case. You'll need to take out the emergency key before you replace the batteries. To do this, place a small flathead screwsdriver into the slot that is in the middle. The case should split when you work the screwdriver all around it.

If you are about to replace the keys, ensure that you have spare keys, since this will cut down your total cost by a significant amount. If you have an extra key, ask the dealer to cut it in half and program it to your car. This is a lot less expensive than purchasing a new fob.

It is possible to add another key to your car If you don't already have one, however it requires lots of research and effort. The cost for adding a second key is several hundred dollars and also requires programming of the car's computer. Professionals can do this but it's not a cheap option.

Replacement Ignition

The new SAAB 9-3 features a more sophisticated alarm system that is based on a key code. This means that should you lose only one functioning key, getting another key can be extremely costly since the car needs to have a special computer module installed and it also must be specially programmed to accept a new key. Even dealers can charge hundreds of dollars to program a new key in the event that they are unable to do it.

If you've lost your sole working key, a dealer will replace your car's computer (known as the CIM or SAAB TWICE) in order to make a replacement, and will charge you the highest price for it. We can reprogram the existing EEPROM on your car's computer to make it ready for an additional key. This will save you more than 50% off the price you'd pay a dealer.

If you've been an owner of an 03-11 SAAB 9-3, then you probably are aware that the ignition key isn't the most durable. If the ignition key you have isn't functioning properly, you must consider replacing it. saab 9-3 key replacement can become sticky and the buttons are known to fall off. It's not as difficult as it appears to replace the ignition key. With the appropriate tools, it could be accomplished in a short time.